Genuine KangerTech EVOD Starter kit

The EVOD has made a big splash in the electronic cigarette industry recently.  It's easy to use design makes it perfect for beginners, but the bottom coil functionality results in top notch performance that is worthy enough for even advanced vapers to take notice.   As an added bonus it holds approximately 1.5ml of e-liquid so frequent refills are not necessary and it comes in many different colors so that you can easily personalize your device to set you apart from the growing crowd of ecig users.

Thanks to the dual viewing windows on each side of the tank you can always see just how much liquid is left so you are never caught off-guard with an empty tank.

It's also rebuildable.  When it burns out, instead of tossing it in the garbage you can use the EVOD replacement heads to bring it back to life as if it were brand new again.

Each EVOD will come loaded with a 2.5ohm Standard Resistance head and there is an additional 5pk of 2.5ohm Standard Resistance heads included with the kit for a total of 7 head and wick assemblies

The heads are the working part (containing the heating element) of the Clearomizer that will burn out or decrease in performance over time, requiring them to be replaced.  However, with most cartomizers, the head is built into the assembly and cannot be removed or replaced separately from the tubing, threads, etc which remain in great working condition for much longer.  So, normally you would have to throw away an entire Clearomizer, when really only one small part needs to be replaced.  The EVOD is rebuildable and allows the head (including the wick) to unscrew from the assembly, allowing it to be changed separately.  Also, replacing the head is much cheaper than replacing the entire Clearomizer, so this kit is cheaper to operate and maintain. 

To Fill:  Simply turn the tank upside down and uscrew the bottom cap from the BCC, fill the outer chamber with E-Liquid to just below the center post, make sure the head/wick is screwed into the bottom cap tightly and then screw the bottom cap back onto the tank.  Lastly screw the BCC onto the battery and you are ready to vape.  

It is recommended that you also purchase E-Liquid with this kit as it will be needed to fill the KangerTech EVOD.

EVOD Starter Kit Includes The Following:

• 2 x KangerTech EVOD 650mAh Batteries
• 2 x KangerTech EVOD Bottom Coil Clearomizers
• 5 x KangerTech EVOD Replacement Heads - 2.5 ohm Standard Resistance
• 1 x USB Wire Charger
• 1 x A/C to USB Converter