The Kanger Aerotank with Airflow Control The Kanger Aerotank offers the same great features and performance as the Kanger Protank 3 but with adjustable airflow control. Turn the dial on the base to increase or decrease airflow to your preference. Adjustable Airflow Control Pyrex tank is replaceable (Same replacement glass as Protank 2 and 3) Can be fitted with 510 Drip tip Replaceable Dual Coil Atomizer Heads (NOT interchangeable with Protank 1 and Protank 2, but it is interchangeable with the Protank 3) Bottom Dual Coil 2.5ml capacity The Aerotank is 510 Threaded and it will work on 510 thread MOD/APV without the need for an adapter (comes with eGo Thread Cover for compatibility with eGo batteries and mods) Dimensions: 2-3/16"L x 3/4"D (without drip tip)  Replacement Heads for this product can be found here:  KangerTech Protank 3 and Aerotank Dual Coil Replacement Heads (5pk)

	Package Contents: 1 x Kanger Aerotank with Airflow Control (Pyrex tank, top cap, bottom cap and 510 base) 1 x 510 Drip tip 1 x Ego Cone Cover 2 x Dual Coil Atomizer Heads

How to Use your KangerTech Aerotank:

• To fill, turn the tank upside down and remove the threaded end cap.  Fill the outer portion of the tank (avoid getting e-liquid into the center airflow tube).  Screw the head and wick assembly onto the threaded end cap tightly then screw the end cap onto the tank tightly.  You can now turn it rightside up and check for leaks before using.
• Gurgling or Leaking can occur if liquid gets into the center airflow tube.  To clear this liquid and improve performance remove the tank from the battery and blow through the mouthpiece into a paper towel.  The excess liquid will come out of the threaded end of the device.  If this happens often you may need to check that all connections are screwed down tightly or replace the head and wick assembly with a new one.
• The head and wick assembly will sometimes loosen itself when the threaed end cap is unscrewed.  Always check that it is screwed on tightly before replacing the threaded end cap.  Not doing so could result in a leaking or non-working device.
• You should never run the tank completely dry.  Doing so could result in a burnt or damaged wick and can cause leaking.  Refill the tank when the liquid level reaches approximately 1/3 full
• The lifespan of replacement heads can vary quite a bit, but following the above instructions will maximize the lifespan of the coil.