FAQs

The Unflavored Nicotine is for mixing your own liquid. Just select your nicotine mg, bottle size and PG/VG mix to get started!

You can find our Unflavored Nicotine by following THIS LINK.

The liquid used in electronic cigarettes, often called E-Liquid, is usually a base mixture of Propylene Glycol (PG) and/or Vegetable Glycerin (VG) with flavoring and/or nicotine added according to preference. As the vapor is inhaled by the user they are able to both taste the flavoring and absorb the nicotine that is diluted in the E-liquid, if any.

Both PG and VG are considered GRAS (Generally Recognized As Safe) by the FDA and EPA. They are common ingredients found in many of the foods we eat, cosmetics we use, medications we take, and common household items such as toothpaste, mouthwash, and soap. They are also used in the fog machines used in theaters and night clubs.

PG is a very thin liquid that dilutes and carries flavors very well, making it the optimal base for mixing, but when thinned out even further by the addition of flavoring and nicotine it may produce less vapor. PG based liquids are recommended with standard tanks like CE4s, Kanger Protanks, Aspire Tanks, iClear tanks, etc. Also, a very small percentage of the population experiences a sensitivity to PG that may present itself in a number of ways from throat irritation to skin irritation. However, most people with this sensitivity are still able to use liquids that contain a lower amount of PG without any negative effects.

VG is a slightly sweet and very thick liquid in its pure form, which results in much higher vapor production than PG. However, the downside to this thickness is that it may cause wicking, clogging, or burning issues in some devices if the VG concentration in the liquid is too high, which is why VG based liquids are not recommended to be used with regular tanks; this VG based liquid is what is required for Drippers and Subtanks. Also, due to the inherent sweetness of VG it tends to alter or dull the flavor slightly and reduce the amount of throat hit experienced by the user.

Ultimately, the E-Liquid mixture percentages of each user are merely personal preference based on the tradeoff between flavor, throat hit, and vapor production. However, it is recommended for most standard devices that no more than 15-20% VG be used in the E-Liquid to provide a boost in vapor production without the negative effects of higher VG concentrations; in SubOhm systems at least an 80% VG is recommended, though some Premium eLiquid brands that manufacture 50/50 blends that work well in both drippers and standard tank systems.

Your eLiquids are going to be ready to vape. All you have to do is open the cap, fill your clearomizer and vape.
The Nicotine / Flavorings section is for the Do-It-Yourselfers; a lot of people go this route as a hobby for them. There is a good bit of information you must obtain first in order to properly mix your eLiquids. You need to know about your nicotine strength, the amount of flavoring to use and how much PG / VG is going to go in it.
You will also need to have pleanty of mixing supplies handy and to make sure that you do not use the same mixing supplies that were used in your nicotine base with your pure PG / VG.

We also suggest visiting ECF's DIY E-Liquid Forum for helpful info.